Semi-Permanant PV installation
For the past few days, I have been pulling the PV panels from the shed and pointing into the light.
I mounted the 4 panels onto a board, and put ontop of my shed.
First I had to figure out a way for the attachments to work to reduce any gaps. I figured out staggering the connections would work. And it did better than I expected.
Solar array spacing for attachment points
Then all the panels were attached to the board like this.
Then the panels where put on top of the shed like so. They are not screwed into the roof, only just laying on the roof. It was pretty heavy, so I double it will move anywhere.
Solar Array in place
So that is all for now.
Later I will show the battery, controller, inverter inside the shed.